Skip Navigation

Kingspan

Kingspan Insulation logo

The Kooltherm K-range is an extensive range of premium performance rigid phenolic insulants for roofs, walls and floors. Rigid phenolic insulation offers the following benefits:

  • With thermal conductivity as low as 0.020W/m.K rigid phenolic insulation is the most thermally efficient insulation product commonly available;
  • utilises the thinnest possible insulation board to achieve required U-values;
  • fire performance can be equivalent to mineral fibre;
  • class O fire rated insulation core
  • achieves the best possible rating of <5% smoke obscuration when tested to BS 5111: Part 1
  • its closed cell structure resists both moisture and water vapour ingress - problems which can be associated with open cell materials such as mineral fibre resulting in reduced thermal performance;
  • unaffected by air infiltration - problems that can be experienced with mineral fibre resulting in reduced thermal performance;
  • safe and easy to install
  • non deleterious material
  • provides reliable long term thermal performance over the lifetime of the building; and
  • manufactured with a CFC/HCFC-free blowing agent that has zero Ozone Depletion Potential and low GWP
 
Kooltherm K3:
Insulation for solid concrete
and suspended ground floors
Kooltherm K7:
Rafter Level insulation for
tiled or slated pitch warm roof spaces
 Kooltherm K3  Kooltherm K7
Kooltherm K8:
Partial fill cavity wall insulation
Kooltherm K6 & K17:
K6 Brick Wall with K17
 Kooltherm K8  Kooltherm K17

 

Kingspan has launched the Kooltherm K106 Cavity Insulation board, which is a premium performance lower lambda insulation with a fibre-free rigid thermoset phenolic core, a low emissivity composite foil on its inner face and a water-tight, vapour-open polypropylene fleece on its outer face. It is used in cavity walls with a residual 10mm cavity.

Kooltherm K106:
Lower Lambda 10mm Cavity
Kooltherm K6 & K17:
Cavity Board & Insulated dry-lining plasterboard
 Kinspan Kooltherm K106  Kooltherm K17

 

KingspanTherma Range
An extensive range of zero ODP high performance rigid urethane insulants for roofs, walls and floors offering the following benefits:

  • with a thermal conductivity as low as 0.022W/m.K, zero ODP rigid urethane insulation is one of the most thermally efficient insulation products commonly available;
  • easily achieves required U-values with minimum board thickness;
  • achieves the required fire performance for the intended application;
  • its closed cell structure resists both moisture and water vapour ingress - problems which can be associated with open cell materials such as mineral fibre resulting in reduced thermal performance;
  • unaffected by air infiltration - problems that can be experienced with mineral fibre resulting in reduced thermal performance;
  • safe and easy to install
  • non deleterious material
  • provides reliable long term thermal performance over the lifetime of the building; and
  • manufactured with a CFC/HCFC-free blowing agent that has zero Ozone Depletion Potential and low GWP
 
Thermawall TW50:
Partial fill cavity wall insulation
Thermawall TW52:
Insulated dry-lining plasterboard
for plaster DAB/adhesive bonding
Thermawall TW56:
Insulated dry-lining plasterboard
for mechanical fixing
 Thermawall TW50  Thermawall TW56  Thermawall TW56